Garbage Disposal Problems
Fixing disposal problems is actually a simple job, if you’re equipped with the right knowledge. Nonetheless, a lot of people are still scared on dealing with garbage disposal problems, which usually lead to freaking out and calling a professional to get some help. To save you from this dilemma, here are some do it yourself solutions for you garbage disposal problems.
Garbage Disposal Problems – Money Saving Tips
One common problem encountered with garbage disposals is that they may produce too much noise when used. You might hear some rattling or grinding sounds, everytime you turn it on. If noises like these are present, it is probably caused by an object, possibly a metal which was unintentionally dropped down your disposal.
Having this kind of problem unattended can cause damage to your disposal blades. To fix it, turn off the electrical power for that area of your house. Then, get a flashlight and a needle nosed pliers. Using these, look for an item which causes the noise.
- Once you find the item that simply doesn’t belong inside your disposal, and then pull it by using your pliers. After this, the noise should be gone and your disposal will do just fine.
- When Nothing Happens Another commonly experienced problem is when nothing happens when you turn on the disposal. Generally, if this is the case and you can’t hear even a single hum, it means that power isn’t getting into the disposal unit.
- It could be that you have to reset your unit or your circuit breaker is tripped. First, you should look beneath your sink and take a look at your unit. You should find a small red button placed somewhere on the bottom side. Press the button and hold it for a number of seconds.
- After pressing, try to use your unit again. It should start normally, as if it is brand new. If it doesn’t start, then you have to do another trick. Find your electrical panel and see if you have a tripped circuit breaker. Try to reset the breaker that is in charge for that area. After resetting, go back to your drainage unit and do the first step all over again. This should fix the problem.
- If nothing still happens, then it’s about time that you call a professional, because it can be a sign of a bigger overall problem.
2. Humming But Nothing
This is the last real possible problem that you can encounter with your disposal. Sometimes if you place wrong kinds of food in your unit, it gets jammed up. This can also happen if you put too much food down
your disposal without running it.
- To fix this, turn off your unit’s the power and use pliers to reach into your unit and pull out whatever it is that is obstructing the blades and keeps it from spinning. After you have pulled the clog out, get an Allen wrench and use it to spin the blades manually.
- If the blades are now turning, then you are done with the problem. If it’s still not spinning, this means that there are still more that you should remove. Be
sure that you remove everything out, so that you won’t encounter the same problem again in the near future.
- Once you got the blades spinning manually, try to turn on the power, reset your unit and see if it’s working. If it’s still humming, then check for more clogs. If you’re sure that there are no more obstructions and the problem is still there, then you’ve got the green light to call a professional.